Features
● The suction cup "floats" on an air cushion for non-contact handling of workpiece.
● Low vacuum level, high vacuum flow and good compensation for air leakage.
● Safely separates thin and porous workpieces without sucking air through the workpiece.
● Various material for cushion on the bottom, which can meet kinds of requirements such as high temperature, mark free, food and wear resistance.
● Built-in vacuum pump based on Bernoulli principle, no additional vacuum pump required.
Applications
● Handling fragile workpiece
● Paper
● Film
● Biscuit
● PCB
● Silicon wafer
● Solar cell
Working principle

Technical parameters
Model | Pull-out force (N) | Air consumption (NL/min) | Air supply pressure (bar) | Working temperature (℃) | Weight (g) |
SNT20
| 2 | 80 | 5.0 | 0-60 | 9.5 |
SNT30 | 4 | 100 | 5.0 | 0-60 | 32 |
SNT40 | 6.5 | 130 | 5.0 | 0-60 | 51 |
SNT60 | 13 | 200 | 5.0 | 0-60 | 116 |
SNT100 | 46 | 350 | 5.0 | 0-60 | 252 |
SNT120 | 89 | 420 | 5.0 | 0-60 | 365 |
◇ Note: The tested workpiece is rigid and airtight, air supply pressure range 1-6bar, vertical action. The specified pull-out force does not include a safety factor.