Features
● 1.5 bellows suction cup suitable for workpiece with uneven surface.
● Thin lip and short stroke, suitable for handling light and thin workpiece.
● Various sizes, suitable for workpiece with different sizes.
Applications
● Panel
● Paper
● Plastic film
How to order
SPJ 15 N - M5M - PK
① ② ③ ④ ⑤
① Series | ② Diameter | ③ Material & Hardness | ④ Connection thread | ⑤ Plug |
SPJ | 4 - φ4mm 30 - φ30mm 6 - φ6mm 35 - φ35mm 8 - φ8mm 40 - φ40mm 10 - φ10mm 50 - φ50mm 15 - φ15mm 60 - φ60mm 20 - φ20mm 70 - φ70mm
25 - φ25mm 80 - φ80mm
| N - NBR 55 Black ★ WS - White silicone 50 White ★ CN - Conductive NBR 55 Black with white dot CS - Conductive silicone 55 Black with red dot HP - Mark free rubber 55 Black | Nil - Suction cup only M3M - M3 Male thread M5M - M5 Male thread M8M - M8Male thread M10F - M10x1.25 Female thread
G1F - G1/8Female thread | Nil - Without mark free plug PK - With mark free plug |
◇ Note: 1."★" -Standard material,in stock. For other materials,please consult with AIRBEST.
2. HP material is available for suction cup SPJ10-50.
Selection
Model | M3M | M5M | M8M | M10F | G1F | PK |
SPJ4 | ● | - | - | - | - | - |
SPJ6 | - | ● | - | - | - | - |
SPJ8-40 | - | ● | - | - | - | ● |
SPJ50 | - | - | ● | - | - | ● |
SPJ60-80 | - | - | - | ● | ● | - |
◇Note: "●"- standard, in stock. "-"- unavailable.
Technical parameters
Model | Pull-out force (N) | Inner volume (cm³) | Min. Curve radius of workpiece (mm) | Recommended tube diameter (mm) |
|
SPJ4 | 0.6 | <0.1 | 4 | 4 |
SPJ6 | 1.2 | <0.1 | 6 | 4 |
SPJ8 | 2.2 | <0.1 | 8 | 4 |
SPJ10 | 3.5 | 0.2 | 12 | 4 |
SPJ15 | 8 | 0.5 | 20 | 6 |
SPJ20 | 15 | 1.1 | 27 | 6 |
SPJ25 | 24 | 2.2 | 40 | 6 |
SPJ30 | 32 | 3 | 55 | 6 |
SPJ35 | 43 | 4.5 | 65 | 6 |
SPJ40 | 60 | 6 | 80 | 6 |
SPJ50 | 92 | 11.7 | 95 | 8 |
SPJ60 | 127 | 20 | 125 | 8 |
SPJ70 | 173 | 30 | 150 | 8 |
SPJ80 | 226 | 40 | 140 | 8 |
◇Note: Testing vacuum level -60kPa. Workpiece with smooth and clean surface. The data of pull-out force as above are figured out without considering safety
factor. The data may be different according to different workpiece surfaces.