◇ The Suction cup is closed annular structure, consisting of inner and outer sealing lips
◇ Annular installation is firm and prevents the suction cup from loosening.
◇ Customer can design the inspection instrument according to the hollow part, so as to separate
the annular vacuum part from the inspection inductor.
◇ Steel plate
◇ Plastic plate
◇ Metal sheet
◇ Annular metal stamped parts
|How to order|
|SDL 100 N -G1F|
① ② ③ ④
|① Series||② Diameter||③ Material & Hardness||④ Connection thread|
|SDL 100 N||100 - φ100mm||N - NBR||G1F - G1/8Female thread|
|Model||Pull-out force |
|Min. Curve radius |
|Recommended tube |
◇Note: Testing vacuum level -60kPa. Workpiece with smooth and clean surface. The data of pull-out force as above are
figured out without considering safety factor. The data may be different according to different workpiece surfaces.