● Small size, simple structure and light weight.
● It is equipped with built-in vacuum pump, external vacuum pump is optional.
● Suitable for handling and sorting light and small workpieces.
● It can be used to grasp the workpieces with porous structure and effectively grasp the
workpieces with partial adsorption leakage.
● Sheet metal
Max. theoretical suction
Recommended min. vacuum flow of
vacuum pump (NL/min)
|Optional function |
|TXN22×38||Φ8||18||≥40||G1/4||Mark free /Conductive||45|
◇Note: 1.Testing vacuum level -60kPa, the data of suction force as above are figured out in the condition that the vacuum gripper is full
covered by a rigid airtight workpiece, and without including safety factor, working temperature 0~60℃.
2. The mark free in the auxiliary fucntion of the above table indicates that special materials are attached to the sponge surface to
reduce the mark on the contact surface.
3. Conductivity in the auxiliary functions shown in the table above indicates the use of special conductive sponge materials.